Many men have thought of an increase in the penis, but the methods they know are somewhat frightened.In medicine, there is a tool like a vacuum pump.
It is used for operations on male genitals to maintain the size of the penis.
How does the pump act
The principle of operation is quite simple.Using a vacuum around the penis, low pressure occurs, causing stimulation of blood circulation.For this reason, the cavernous tissues are filled with blood, due to which a rapid increase and hardening of the penis occur.A similar phenomenon in medicine is called hyperemia.
During an erection, the penis fabric is poured with blood, of that, they swell strongly.The vacuum pump stimulates ships and allows you to maintain a member size of 30 to 60 minutes.In addition, this device can be used in place of a massage.
The pressure in the balloon widens the cavernous bodies, considerably increasing the blood flow and the size of the penis.The member after the pump seems much more spectacular than with ordinary excitement.
Do not abuse the vacuum pump during use.The genitals will not become more of that she should, but bleeding, bruises and other complications may well happen!
Varieties
All vacuum pumps have a similar design, not taking into account their principle of action.The ship in which the male organ is located is a plastic balloon with divisions.With it, on the whole, there is a seal nozzle and a pear that pumps the pressure inside the ball.
There are devices with additional devices: Pressure adjustment buttons, Manometers, valves to reset.
In manual air is inflated and removed with a pear or a piston.Their application is good in that they are available for all men who wish to increase their genitals.
In the automatic vacuum, it is created using an electric pump operating on the batteries.The pressure can be monitored on a mounted pressure gauge, and some samples are equipped with a button for the absorption force.
Water devices are a more modern option for an increase in male penis.Their principle of action is based on the fact that instead of air, the ball is pumped with water with a pump.Hydraulic foam has greater efficiency and its lifespan is longer.
How to choose a pump?
The device is selected according to two criteria: in terms of genitals and a specific task.
- The length of the ship must be at least 2-3 cm larger than the penis in an excited state;
- The diameter of the balloon must be selected 1-2 cm larger than the diameter of the male limb during an erection;
- For those who do this for the first time, the experts recommend the use of the manual pump, where air pumping is carried out with a pear.
It is best to buy a device with a transparent ball to monitor the process, and also pay attention to the strength of the equipment from which it is made.
For the advantages and disadvantages
A vacuum pump for men can not only increase the size of the penis, but also have a therapeutic effect.If you are constantly using it, the volume of male genitals increases over time and during intercourse, erection remains much longer.This is due to a decrease in the sensitivity of the organ.
In addition, male dignity increases not only in length, but also in width.
In addition, under the influence of a vacuum, you can adjust the shape of a male organ, especially if it has a curvature.Inside the pump, the penis is kept evenly from the edges of the walls, in this way it is straightened.
The consequences of improper use:
- Due to the violation of the capillaries, special spots occur on the skin of the penis;
- reduction of ejaculation or erection;
- numbness.
Efficiency when using
With constant use, after six months, the shape and size of the penis will become unchanged.The result will be much more effective if you take medication that increases the release of male hormones during this period.
The member after the pump has become up to 3 cm more, for a period of 6 months to a year.The thickness of dignity increased to 2 cm.
Instructions for use
If the vacuum pump is used for the first time, the process should not last more than 5 minutes to avoid unpleasant consequences.Incorrect use can cause disorders of certain functions, as well as an edema.
To prevent this from happening, the following recommendations must be followed
- First, the air must be pumped out of the device, which will improve the circulation of the blood flow in the penis.Previously, it is necessary to take care of the lubrication of the penis.
- An increase in the penis should not last more than 20 minutes.
- To reduce the pressure inside the ship, you should start the air.To do this, simply press a special valve placed near a pear.In some models, for these purposes, there is a small hole covered with a finger during the procedure.
- Once the member has reached maximum hardness, you must put a ring on its basis, which provides an organ invading an organ and holds it in an erection.
- If a pump with a hydraulic pump, before the procedure, it is necessary to take a relaxing bath with hot water.After that, after 8 minutes, male dignity should be placed in an empty vessel.The ring must adapt closely to the scrotum, thus lowering the pressure in this area.The device is placed in such a way that the distance between the penis in the walls of the ball is the same on all sides.It is important to do so before the start of the aspiration moment.By observing these instructions, injuries can be avoided.
- To form an empty environment, experts advise to make several oscillatory movements.Then, excess water is lowered using a trigger.Sometimes the pump should be pressed several times so that all the excess liquid sheet.
- After the water descent, you can rest a little, then carry out the procedure.If the pressure falls, it must be pumped at the required level.
The male advantage can be increased using a set of special exercises, but for this, it is necessary to follow all the recommendations for use of the device.
Throughout the first week, the procedure is carried out 10 minutes once a day.
The second week, 15, for the 10 third minutes twice a day.
The fourth - twice a day for 15, the fifth - 20 minutes in the morning and 10 o'clock in the evening.
Possible consequences
With improper use of the device, injuries often occur.
- Due to the stagnation of the lymph, an inflated ring appears around the head of the penis.Sometimes this problem can occur even with appropriate use.In such cases, it is best to stop the procedure for a while.
- Due to prolonged handling or low pressure in the vessel, a huge flow of lymph occurs, forming swelling.
- The deterioration of an erection is the most common consequence.
- With a strong load, a skin color change can occur.Due to severe release, bleeding often occurs, which can be irreversible.
- Blood vessels are the rarest, but dangerous problem, so it is better to postpone the business to increase the penis.
Contraindication
The duration of the emptiness environment is determined by the expansion of cells.Subject to all recommendations for the use of the device, an impulse effect is created inside the ship.With its increase, negative pressure occurs, which causes numbness, and a person does not feel pain.
The maximum volume of vacuum should not cause pain, but only one effect of less than 18 seconds.The duration of vacuum manipulations per day should not exceed 45 minutes.
The member's male penis has the following contraindications:
- diabetes mellitus;
- sexually transmitted diseases;
- inflammation of the urethra;
- deterioration of the functions of the excretory organs of the digestive system;
- cardiovascular pathologies;
- The risk of blood clots.
Device operation
For the device to keep its ability as long as possible, it needs special care.Since manipulations are carried out in an intimate place which requires careful compliance with personal hygiene rules, the pump must be treated with antibacterial solutions.
Before use, it is recommended to wash the vacuum pump with hot water and soap and treat all its components with antiseptics.After the procedure, this invention is again sterilized, wiped and stored in a clean and dry place.
How to do it yourself?
The device may be useful not only to increase the size of the genital organ of a man or healing therapy.
The pump can be made from improvised means that are stored in the garage or the pantry.
Cuff pump
Before starting manufacturing, it is necessary to prepare all spare parts and tools that can be useful for use.A vacuum pump is generally made from a car or a bicycle handle pump.It is the simplest and most reliable method.
You must first create the opposite effect of the pump so that it does not provide air, but on the contrary, remove it.To make such an effect, it is necessary to relax the pump, by turning the sleight with the rear side, then assemble the device.This will create a vacuum environment.
Then mount the anti-return valve for the descent of excess air.The aquarium compressor valve is suitable for this.It is mounted in the pump pipe to avoid air penetration into the pump.For a greater effect, it is advisable to make your sealing.
This method is the simplest and is designed to create a shallow vacuum environment.The performance is up to 80% air pumping.If you need to make a more powerful pump, you can use a cleaning compressor.
Use of a medical syringe
We make a vacuum pump from an ordinary medical syringe.For this, the following materials will be necessary:
- plastic t-shirt;
- A plastic tube, which should coincide with the diameter of the TEE and syringe holes;
- two valves of the aquarium compressor;
- The syringe (the power of the future device depends on its size).
From the plastic tube, it is necessary to cut three pieces of 10 cm, then fix them to the tee.The joints must be hermetic and well fixed so that they do not jump in the event of pressure.The tee with three bodies must be obtained.
One of them, located in the center, is attached to the nose of the syringe.On the two remaining ends, it is necessary to install the valves, and one must open, the other inward.In order not to confuse, the arrows are generally placed on aquarium valves indicating the direction of the air movement.
Such a device made from a syringe can pump liquid from one container to another.
To carry out the procedure, a withdrawal with a valve is lowered into the liquid, and the second in an empty ship, which must be filled.The pump is trained using a piston.